Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ipmg registration DENIED

Status
Not open for further replies.

maxim43g

IS-IT--Management
Jan 28, 2021
36
RU
hello
SRPT174 STARTUP: IPMG registration denied. Unconfigured IP address [10.11.116.8
].

PING 10.11.116.8 SUCCESSFUL


need help?
 
ld 143 CCBR000 .upgmg SRPT016 OMM: IP link is DOWN between Call Server and IPMG[0 0 said:
stat

+-------------------------------------------------+
| IPMG SOFTWARE UPGRADE STATUS |
+-------------------------------------------------+
| Auto Sequential Software Upgrade is Enabled |
+-------------------------------------------------+
| | | |IPMG| NEEDS |
| IPMG | STATUS | LAST UPG TIME |TYPE|UPGRADE|
+-------------------------------------------------+
| 0 0 | SUCCESS| 2021/06/15 17:25:50| MGC| NO |
+-------------------------------------------------+
.
SRPT257 shutDownServerSession: shutting down ssd server session [0] for IPMG [0 0]

ELAN023 vtServerRx: tcp Status = 2, TCP socket error
treat it as a connection loss and send an error message to RUDP.

ELAN014 ELAN 0 host IP=10.11.216.3 is enabled

ELAN009 ELAN 0 host IP=10.11.216.3 disabled, write to socket
fail due to far end disconnect or Ethernet problems

ELAN009 ELAN 0 host IP=10.11.216.3 disabled, write to socket
fail due to far end disconnect or Ethernet problems

ELAN009 ELAN 0 host IP=10.11.216.3 disabled, write to socket
fail due to far end disconnect or Ethernet problems

ELAN009 ELAN 0 host IP=10.11.216.3 disabled, write to socket
fail due to far end disconnect or Ethernet problems

ELAN009 ELAN 0 host IP=10.11.216.3 disabled, write to socket
fail due to far end disconnect or Ethernet problems

ELAN009 ELAN 0 host IP=10.11.216.3 disabled, write to socket
fail due to far end disconnect or Ethernet problems
***
SRPT017 OMM: IP link is UP between Call Server and IPMG[0 0]
*
>
SRPT227 Registration denied for IP[10.11.216.3] IPMG[0 0] Reason[8] OldStatus[1] MainRes
et[0] ExpRegStatus[2]

ELAN009 ELAN 0 host IP=10.11.216.3 disabled, write to socket
fail due to far end disconnect or Ethernet problems

ELAN009 ELAN 0 host IP=10.11.216.3 disabled, write to socket
fail due to far end disconnect or Ethernet problems

ELAN009 ELAN 0 host IP=10.11.216.3 disabled, write to socket
fail due to far end disconnect or Ethernet problems

ELAN009 ELAN 0 host IP=10.11.216.3 disabled, write to socket
fail due to far end disconnect or Ethernet problems

ELAN009 ELAN 0 host IP=10.11.216.3 disabled, write to socket
fail due to far end disconnect or Ethernet problems

ELAN009 ELAN 0 host IP=10.11.216.3 disabled, write to socket
fail due to far end disconnect or Ethernet problems

SRPT016 OMM: IP link is DOWN between Call Server and IPMG[0 0]

SEC106 Unable to request security domain membership because SSH transfers are disabled


=> reg ucm device 10.11.216.3

=>
SEC106 Unable to request security domain membership because SSH transfers are disabled
stat ucmsecut
SCH0099 UCMSECUT?

=>

=> stat ucmsecurity system
MGC 10.11.216.3 UNREGISTERED

=>
SRPT226 Registration has been granted for IP[10.11.216.3] IPMG[0 0]

SRPT091 HB: Local side IPL health change from 2 to 0.

SRPT017 OMM: IP link is UP between Call Server and IPMG[0 0]
write: S_errno_EPIPE

XMI002 0 0 1 XMLC
write: S_errno_EPIPE

XMI002 0 0 4 XCOT: EUROPEAN
write: S_errno_EPIPE

XMI002 0 0 3 XCOT: EUROPEAN
write: S_errno_EPIPE]



 
going back to mgc command line, when i used the user name, pdt2, then the pdt2 password, i was able to login, but when i used the command, joinSecDomain, it says user login has no sec_admin privileges

admin login password does not match
 
enl transfers secure Enabling secure transfers. => SEC087 Secure transfers have been enabled. stat transfers secure ENABLED => SRPT091 HB: Local side IPL health change from 0 to 2. ELAN014 ELAN 0 host IP=10.11.216.3 is enabled reg ucm device 10.11.216.3 IP address of the Primary Security Server [10.11.116.9 said:
.
User Name (UCM): admin
Password (admin):
Sending messages to 10.11.216.3 to authorizing it to request security domain membership.
Waiting for status updates from the element...

=>
SRPT016 OMM: IP link is DOWN between Call Server and IPMG[0 0]

SRPT257 shutDownServerSession: shutting down ssd server session [0] for IPMG [0 0]

ELAN014 ELAN 0 host IP=10.11.216.3 is enabled

ELAN023 vtServerRx: tcp Status = 2, TCP socket error
treat it as a connection loss and send an error message to RUDP.

ELAN009 ELAN 0 host IP=10.11.216.3 disabled, write to socket
fail due to far end disconnect or Ethernet problems

ELAN009 ELAN 0 host IP=10.11.216.3 disabled, write to socket
fail due to far end disconnect or Ethernet problems

SRPT017 OMM: IP link is UP between Call Server and IPMG[0 0]

SRPT227 Registration denied for IP[10.11.216.3] IPMG[0 0] Reason[8] OldStatus[1] MainRes
et[0] ExpRegStatus[2]

ELAN009 ELAN 0 host IP=10.11.216.3 disabled, write to socket
fail due to far end disconnect or Ethernet problems

ELAN009 ELAN 0 host IP=10.11.216.3 disabled, write to socket
fail due to far end disconnect or Ethernet problems
stat
ELAN009 ELAN 0 host IP=10.11.216.3 disabled, write to socket
fail due to far end disconnect or Ethernet problems
ucmse
ELAN009 ELAN 0 host IP=10.11.216.3 disabled, write to socket
fail due to far end disconnect or Ethernet problems
curity system
MGC 10.11.216.3 UNREGISTERED]
 
=> reg ucm device 10.1 SRPT091 HB: Local side IPL health change from 0 to 2. 1.21 ELAN014 ELAN 0 host IP=10.11.216.3 is enabled 6.3 IP address of the Primary Security Server [10.11.116.9 said:
.
User Name (UCM): admin
Password (admin):
Sending messages to 10.11.216.3 to authorizing it to request security domain membership.
Waiting for status updates from the element...

=>
SEC116 User ADMIN has been allowed to log in using an emergency account.

SEC102 Element 10.11.216.3 failed to request membership in the security domain, Reason
FAILED: Upload Element Properties file failed!.]
 
You have been struggling for 3 weeks now. Is it time to pay a channel partner who works with the CS1000 to help you?
 
I think you have several issues but one is highlighted by:

SEC116 User ADMIN has been allowed to log in using an emergency account.

this is telling you the security server did not respond to the Callserver before a timeout so it used a locally stored copy of the account to authenticate. This and the MGC issues would lead you to an issue with the security server. You need to sort that out first. But like gwebster I am thinking you need help on this because it looks like most of it needs fixing.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top