Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IPLDK 300 Office Ver 3.8 LDP 7004 Transfer Button 1

Status
Not open for further replies.

Jonah29

Programmer
Oct 4, 2015
205
GB
Hi Everyone,
I have an IPLDK 300 Ver.3.8 populated with mainly LDP 7004 phones. The 7004 phones use the first flex key as a transfer key. One of the 7004s appears to have had it re-programmed to something else, a Loop Key or a Line Key etc. Is it possible that it has been changed to another feature? How can I change it back to a transfer key? There doesn't seem to be an option for a Trans button in Flex Key Programming. There does appear to be an option for it to be programmed for everything else!
Regards
Mark
 
Hi Mark

If you get another model of handset, LDP7008,7016,7024 and plug it into the socket then plug the original 7004 back in the socket the flex buttons will default back to normal.

Eats

Ok, Press Trans *#..... TRANS/PGM..... the transfer key?.......sigh!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top