Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ipLDK-300 Office download billing via LAN 1

Status
Not open for further replies.

slavog

Technical User
Jun 6, 2009
14
PL
Hello,
Lately I connected an ipldk-300 to the LAN.
I can progrmam the PBX with LDKPCADMIN

Is it possible to download a billing from a PBX to the PC?
Is there any program to do this?

Slav
 
No, this can only be done through a serial connection. E.g the serial port on the MPB, or MISB.

///doktor
 
Thanks doktor again!

bigg3rdude24, I mean to conect to ipLDK-300 monthly with some program and download all smdr's from PBX buffer.
 
with ipldk 60 you can do this:
PGM 177:
select Print Enable
SMDR Record Call type:ALL
I SMDR Connection: LAN

PGM 175:

Info On line SMDR: select TELNET 1

From you PC, connect to ipldk by telent

make a call

when you hang up you will see records..


 
Dear Sir,

There are 2 kinds of SMDR in ipLDK. First is online SMDR,The call will be print out immediately after finished the call.
The second is off-line SMDR all the call will recording to SMDR buffer. The are maximum 5000 records in LDK-300.
To do the SMDR off-line please perform the following step,
- PGM 177 Flex bttn 1 = "On"
- PGM 175 Flex bttn 1 = COM1 = RS232 on MPB
Telnet = TCP/IP connection

To print out the SMDR buffer.
- Only attendant can print out SMDR buffer.
- Press Trans/Pgm 0111
- Select station range ex; 100 = 100100
- Press Hold/Save
- The SMDR will print out to the selected connection in PGM 175 Flex 1

To capture the SMDR please follow as your connection software.

Cheers,
 
Thank you, Ohtapa. This desription is very good.

///doktor
 
I just used puttytel for loging in to LG ARIA 300. I can see login screen but it does not accept my password which is currently I using for PC Admin software. Is there any other password that I have to try?
 
Once connected as you have- You do NOT want to enter a password.
Press the Enter key till system shows "Access Canceled!"
As your jpg shows...

If your SMDR is set to Print in PGM 177
Option 2 - SMDR Print = ON
Option 3 - Recording Call Type = ALL
Option 7 - Records in Detail = ON

Then PGM 175 Option 6 - On-Line SMDR Print (real time SMDR) - set this to TELNET

You should see the SMDR records from the system.

 
Hi SteveBUK,

Thanks for detailed reply but they did not work. All settings same but no chance to get through that passwrod thing.
Is ther any other way to do this?
Or,

do you know any program which can run under windows with graphical features?

Regards
 
nope didnt work aswell. tried with telnet but still can not pass that stage.
 
Hi guys,

When you have the Access Canceled! message you will need to make an call out from a station to then see the SMDR record
(you may be doing this already)

Below is my quick capture

Trying 10.147.155.222 (PORT:23)...
Connected to 10.147.155.222...
Welcome to LDK-20 system. Press enter.
Your address is 10.147.155.38. Your port number is 3.

LDK-20 System
Version UK66P-3.8Bn MAR/09
DATE: 02/03/01
TIME: 12:29:51
MBU TYPE: MBUB
SITE NAME :
ENTER PASSWORD:
Access Canceled!



---- Site Name : --------------------------------------------------
-------------
NO STA CO TIME START DIALED ACT CNT COST
ACCOUNT CODE
---- ----- --- -------- -------------- ------------------- --- ----- -----------
------------
0001 10 004 00:00:00 03/02/01 12:30 O123456789 ** 0 0

0001 10 004 00:00:00 03/02/01 12:30 O987654321 ** 0 0

 
Its working:)) Thanks a lot. So do we have better graphical option than this?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top