IPK 64 switch

[tjcom]

Is there a way to copy one set to another on an Elite IPK 64 system.
I just want a single copy not a range. And sets are the same.

Thanks

 

[rocksea]

Hi. It's simple; first note the port number of each phone (press feature 4 on each), then enter programmming and press lk6 followed by lk 4. Enter your source port, then press Transfer, enter your destination port and press Transfer.

No need to enter a second destination port to establish a range...

 

[tjcom]

Thanks!I knew it was something that simple.

 

[tjcom]

Hi Rocksea....one more question.....sorry.....I need to have Auto attendant answer after four rings instead of immediate 0 rings which what it is now.

thanks

 

[telman2010]

You can either do a delay ring on the first port of voicemail or you can do a delay DIT to the first port of voicemail. Either way works fine. Most likely your lines are DIT to voicemail right now so the easiest thing to do would be to set up selay DIT.

 

[tjcom]

Where is the DIT delay set at......voicemail or phone switch.
Thanks

 

[telman2010]

Phone switch uhh...memory block 3-62 I think. Don't have a manual right here in front of me but that should be pretty close to the right memory block.