IPECS LPD-7008D phone, dial from call log?

[jblumel]

With an LPD-7008D (8-button) phone connected to an IPECS system, I can assign either Redial or Call Log to a Flex button. The Call Log is nice because you can see incoming as well as outgoing calls. However, I'm not able (or at least don't know how) to dial numbers from the call log using the 8-button phones, which don't have the dedicated buttons for that, like, say, the 24-button phones have.

Is there a way to do this, dial numbers directly from the call log?

 

[Jonah29]

Hi,
When the number from the call log is in the display press the hold/save key this will initiate the dialling. This is what you do on the ipldk range but a lot of the commands for both installers and users are similar if not the same in many cases. See how you get on.
Regards
Mark

 

[jblumel]

Perfect! Thanks.