IPECS Communicator on IPECS EMG80

[rey31]

could anyone here be of help on how to register and configure iPECS Communicator to iPECS Emg80
i believe the equipment is equipped with free 2 license for IPECS Communicator.

please help.thanks.

 

[xs650]

-set in PGM443 ID, Password and desired number.
-in IPC set the eMG80 IP as SIP server address and use ID and Password
from PGM443 as auth name and auth password

 

[rey31]

thank you xs650, ONE MORE THING DO I HAVE TO ACTIVATE THE free license?
how will i do that?

 

[xs650]

You don´t have to activate the free licenses.
When you can see in the system overview (2 copies free) and currently used is not 2
then you can register the IP Com.

 

[Scobber]

Aren't the free licenses for Phontage Deluxe, not iPECS Communicator?

If you have free licenses for iPecs communicator because of a promo, you need to get the lock key from your distributer.
You send them the key from System Management, Appliances Control, Lock Key install.
Then you will get a response code you place next to iPECS Communicator.

 

[xs650]

I my system (1.0Fe) are two Phonetage Deluxe and two IP Com licenses free.

 

[Colbro1]

Hi All,

Has anyone tried to register a yealink phone with the IPECS?

Is it just a case of getting a sip phone licence to get it to work?