IPECS BLF Manager

[jomspulido]

I have a two IPECS MFIM 50B network together using IPSEC VPN

I installed a BLF manager version 1.1Af

the BLF manager is working fine in the PC(icons goes to DND, busy, idle). The two IPECS where both recognize on the BLF manager. but the DSS keys which was set up on the phones do'nt light up which will show that the other extensions are busy?

I have read here in one of the forum that there is a BLF manager version 1.1Ag, can you provide me a copy if its possible

Many thanks,
Joms

 

[doktor]

I found the BLF 1.1Ah here:

http://www.artcom.ru/download/?TYPE=6&MODEL=507

First one under "Applications".

Use IE8 to translate this page.

///doktor

 

[SteveBUK]

This may be of use....

IPECS BLF without BLF Manager

When networking IPECS systems you do not need to use the BLF Manager program.

The settings in the IPECS are as follows :
Under Neworking Data / Net Supplementary Attr(321)
Make sure that the BLF Manager IP Address is empty.

Under Networking Data / Net Numbering Plan(324)
For each table entry enter the MFIM address for the other end, note UDP 5588 is the port in default

Regards
Steve

 

[doktor]

You are right. It is only in mixed installation´s with ipLDK's and iPECS that we need an BLF manager...

///doktor

 

[jomspulido]

Thanks foryour reply

 

[jomspulido]

Thanks for your reply