IPECS 50 MFIM SIP Trunks

[AndyCMC]

Hi

I'm just wondering if anyone has experienced the same fault as I am getting when setting up SIP trunks on IPECS 50 MFIM.

When dialing out, there is about a 7 second delay of silence at the called party's end after the call has been answered.

I have tried various programming of the router and upgraded the software but I'm still getting the same problem.

Does anyone have any suggestions or have had the same problem ?

Thanks

Andy

 

[doktor]

Have you checked the timers in PGM180-182?


///doktor

 

[Chjppie]

Try pressing a # at the end of your dialed number. It seems to speed up the process.

 

[jokkmokk]

By pressing # you overrides the enblock-time, which i think is 5sec by default.

 

[SteveBUK]

The # signfies end of string and there for the system sends the number... Regards Steve

 

[AndyCMC]

Thanks for the advice guys but the problem appeared to be with the router.

 

[Chjppie]

Cheers for that AndyCMC! Always good to hear how the problem was resolved.

 

[doktor]

Yeah.. we love status updates & feedback...

///doktor