hdbeavis
Technical User
- Oct 12, 2006
- 56
All,
I am trying to implement a SIP Trunk between an Avaya Communicaiton Manager System R5.2 and an IPCM SIP server. Calls come in the Avaya and route across the SIP trunk to the IPCM just fine. However, when a user tries to call outbound from the system on the other side of the IPCM I don't see the call hitting the trunk. The trunk is currently setup directly from a Clan to the IPCM. I was given homemade config notes from the IPCM vendor showing the direct connection from the Clan to the IPCM. It was my belief that Avaya Clan's didn't support direct SIP trunks, without the use of an SES server, until CM6.0. The IPCM vendor is sure they have this setup at other customer sites without the use of a SIP Server but I am just not convinced. Has anyone by chance set this similar configuration up?
I am trying to implement a SIP Trunk between an Avaya Communicaiton Manager System R5.2 and an IPCM SIP server. Calls come in the Avaya and route across the SIP trunk to the IPCM just fine. However, when a user tries to call outbound from the system on the other side of the IPCM I don't see the call hitting the trunk. The trunk is currently setup directly from a Clan to the IPCM. I was given homemade config notes from the IPCM vendor showing the direct connection from the Clan to the IPCM. It was my belief that Avaya Clan's didn't support direct SIP trunks, without the use of an SES server, until CM6.0. The IPCM vendor is sure they have this setup at other customer sites without the use of a SIP Server but I am just not convinced. Has anyone by chance set this similar configuration up?