IPBS 2 DECT BASESTATION CONFIG

[pea123]

Greetings.

I just received a 3300 2 days ago and it came with a dect basestation written IPBS2 at the back. I would like to think this is a new type. I have worked on the Ascom one before.
Could someone please help me with information on how to configure this one. I don,t seem to be able to get notes from MitelOnLine.

Please help.

Thank you.

 

[bobcheese]

Have you created a user on the 3300 for the handset?

 

[pea123]

Managed to subscribe the handsets with the IPBS2. Now the handsets are saying PBX OUT OF SERVICE. I would like to think the 3300 is not communicating with the IPBS2 which brings me to my earlier question of SIP Device Capabilities. How do I make the IPBS2 to connect with the 3300?
On the 3300 I have the handsets programmed as 5603 SIP.Since there is no OPTION 140 OMM on MCD6.0 how do I make the connection between the 3300 and the IPBS2?
Also when I try to add a new user on the IPBS2 I get an error message saying: ERROR. CHECK INPUTS. LDAP ERROR.
more help please.

 

[bobcheese]

Im the base station configuration, under 'DECT -> MASTER' have you entered the PBX IP address?

 

[pea123]

Yes I have entered the PBX IP address under DECT-> MASTER. How then does the PBX reciprocate?

 

[bobcheese]

from memory it is not aware of the base station specifically. It communicates with the 'fake' MAC addresses created for the phones during registration

 

[DoubleUT]

I've added a Document that will be taking you through the steps of setting up an IPBS environment. The only part that might be different is that you could have less freq. File can be downloaded from the following link.

https://www.wetransfer.com/download...e508d17bcc9bde1a0bd6a11320140219230324/d82f0a

 

[pea123]

Thanks for the doc but my only problem is that I can only read English language but I will try my best to decipher the doc.

 

[pea123]

I finally got everything working. Thank you for your responses. There is this one 5603 which was throwing me off track. It is the only one that I was using for testing and was saying PBX out of service. When I tried the rest of the handsets they all worked fined. I then unsubscribed it. Now every attempt to subscribe it fails.
I think I need to flush the handset.
Does any one know how I can flush it or what I could do to subscribe it successfully.
Note that all my other handsets have subscribe and are working except for this one.