IP500v2 and GFI FaxMaker

[VrRotatetx]

Ok - driving me crazy.

Got faxmaker setup and running along with XCAPI (I guess I need this).

Can anyone tell me how to config the IP Office (8.1) to route incoming calls from the call route (PRI) number to the faxmaker server??

 

[intrigrant]

This is old but it still works for analog extensions for the faxserver.
Individuals and departments can have their own fax numbers.
DTMF tones, which identify individuals are passed to the fax server, which could have as few as one or two lines.

In the following example, when someone dials 5551234, the system dials 501, which is then rerouted to the fax server:

Attach the fax modem to extension 216

Configure extension 216 with Caller Display type = DTMFB

Create a Hunt Group 500 with extension 216 as a member.

Create a User, eg. Fax501 with an extension of 501 and set Forwarding Unconditional to 500

Create an Incoming Call Route to extension 501 where the Incoming Number is the user's required personal fax number. Repeat for each user's personal fax number.

Incoming Number: 5551234

Destination: 501 Fax 501

A simple mind delivers great solutions

 

[VrRotatetx]

Can't this be done through IP with no modems?

 

[intrigrant]

Sure but then the DDI number is available by default, just google on "application note avaya ip office fax server" and you'll have a lot of examples how to setup.

A simple mind delivers great solutions