headcase69
Programmer
Hey guys,
IP500v1 R9.0.4 (all licenses valid)
VMPro
I had a remote VPN phone at a remote office that has worked great for several months, but now has the "system Incompatibility" message on the screen. I have looked at several other posts on this problem, but can't seem to get it to work? With R9, my understanding was that I did NOT need a license for the VPN phone. I saw in a couple of posts that "remote worker" was needed for this? I also saw several posts that suggested I should put "SET SMBLIC 1" at the top (very top) of the 46vpnsetting.txt file (I renamed the 46vpnsettings_Template.txt file to 46vpnsetting.txt) and that did NOT work.
So.... I'm wondering if I need a license (which I don't think I do) and/or if there is anything else I can do? By the way, the phone does work if I bring it in the office and bypass the VPN load.
Any help would be great! As always, this site is the best for help!!
IP500v1 R9.0.4 (all licenses valid)
VMPro
I had a remote VPN phone at a remote office that has worked great for several months, but now has the "system Incompatibility" message on the screen. I have looked at several other posts on this problem, but can't seem to get it to work? With R9, my understanding was that I did NOT need a license for the VPN phone. I saw in a couple of posts that "remote worker" was needed for this? I also saw several posts that suggested I should put "SET SMBLIC 1" at the top (very top) of the 46vpnsetting.txt file (I renamed the 46vpnsettings_Template.txt file to 46vpnsetting.txt) and that did NOT work.
So.... I'm wondering if I need a license (which I don't think I do) and/or if there is anything else I can do? By the way, the phone does work if I bring it in the office and bypass the VPN load.
Any help would be great! As always, this site is the best for help!!