Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
ip500
- Thread starter HELPATECH
- Start date
You can do a tie line
one in one out on both systems
IE
Partner LINE PORT to DS PORT IP500
IP500 ANALOG TO extension port ON PARTNER
Create call appearance on IP500 set for that line
should be able to dial from partner to IP500
Partner pick up that line and dial extension of IP500
IP500 call appearance to partner extension
one in one out on both systems
IE
Partner LINE PORT to DS PORT IP500
IP500 ANALOG TO extension port ON PARTNER
Create call appearance on IP500 set for that line
should be able to dial from partner to IP500
Partner pick up that line and dial extension of IP500
IP500 call appearance to partner extension
- Thread starter
- #3
Kyle Holladay
ACA-I, ACA Call Center, ACS-I, ACS-M, TIA-CTP, MCP/MCTS Exchange 2007
ACE Implement: IP Office
"If it worked the way it should you wouldn't need me
Actually for that matter get a 2nd IP500 with a Phone8 card and a VCM running standard mode and do an SCN with the Partner connected via CO ports to the Phone8 in the IP500. Would show up as lines on the Partner and stations on the IP500.
Kyle Holladay
ACA-I, ACA Call Center, ACS-I, ACS-M, TIA-CTP, MCP/MCTS Exchange 2007
ACE Implement: IP Office
"If it worked the way it should you wouldn't need me
Kyle Holladay
ACA-I, ACA Call Center, ACS-I, ACS-M, TIA-CTP, MCP/MCTS Exchange 2007
ACE Implement: IP Office
"If it worked the way it should you wouldn't need me
- Status
