Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IP500 to IP500V2 upgrade 2

Status
Not open for further replies.

jesears

Technical User
Feb 18, 2009
166
US
Hey Everybody, I am getting ready to upgrade a customer from an IP500 to a V2 and would like to know if the existing 5400 series phones will work on R10.1? I know they are not supported but has anybody tested 5400's? Are their any other things I need to watch out for?

Any help would be greatly appreciated!

Thanks
 
The phones will work and for other issues read the upgrade manual.
Nothing special.
 
They'll miss out on a lot of functionality/integration using those handsets though :)
 
Thanks for the info. They plan on upgrading the phones later. I didn't think it would be any special but wanted to ask in case someone with more experience than me had run into some problems. Thanks again for the help. You guys are always on top of it!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top