IP500 Point to Point trunks

[happynova72]

Hello everybody! I have (2) IP500 R4.2 system that I am going to network together with a point to point. They currently have the PtoP as a voice curcuit but because there is no caller id between the locations, I am going to change the curcuit to data and i have a couple Kentrox Q2200 routers to install. My question is does anybody have any documentation on how to set up the short codes and also the LAN routes/IPtrunks for this to work? Does Avaya have any tech pages on the subject? I do not know where to begin with this change. Any help would be wonderful!

 

[Lodde]

http://marketingtools.avaya.com/kno...ojects/manager/index.htm?scn_enabling_scn.htm

 

[happynova72]

Good documentation. One question though, I have been told that you do not need a SCN licence to do this type of calling between locations, but when I set it up the IP trunk under system status says "disabled no licence". What gives?

 

[tlpeter]

For iptrunks you need a scn license with an ip500 !!!
The 400 series doed not need the license but most of those are out of sale


ACA - Implement IP Office
ACS - Implement IP Office
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!

 

[amriddle01]

happynova72, I'll save you some headscratching, nearly everything on the IP500 is licenced nowadays, even using certain handsets requires a licence. You're lucky they don't have a "powering up the unit" licence. Cr*p isn't it!!

ACS - IP Office Implement

 

[Lodde]

But is is close, you need the Smartcard