Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IP500 5.0 "Failed to save the configuration data"

Status
Not open for further replies.

samnm1

Technical User
Aug 28, 2013
7
AU
Hello,

I have an IP500 versoin 5.0 that when i do any change, I always get "Failed to save the configuration data. (command cannot execute due to other system activity)"

Looking at Monitor at the same time, I always get the below

3147546568mS PRN: The merge cannot be performed while another merge is already in progress
3147546568mS PRN:
3147546569mS PRN: WARNING:
3147546569mS PRN: The merge cannot be performed while another merge is already in progress
3147546569mS PRN:
3147546571mS PRN: WARNING:
3147546571mS PRN: The merge cannot be performed while another merge is already in progress
3147546571mS PRN:
3147546572mS PRN: WARNING:
3147546572mS PRN: The merge cannot be performed while another merge is already in progress
3147546572mS PRN:
3147546573mS PRN: WARNING:
3147546573mS PRN: The merge cannot be performed while another merge is already in progress
3147546573mS PRN:
3147546575mS PRN: WARNING:
3147546575mS PRN: The merge cannot be performed while another merge is already in progress
3147546575mS PRN:
3147546576mS PRN: WARNING:
3147546576mS PRN: The merge cannot be performed while another merge is already in progress
3147546576mS PRN:
3147546577mS PRN: WARNING:
3147546577mS PRN: The merge cannot be performed while another merge is already in progress
3147546577mS PRN:
3147546579mS PRN: WARNING:
3147546579mS PRN: The merge cannot be performed while another merge is already in progress
3147546579mS PRN:
3147546580mS PRN: WARNING:

does anyone know what is the problem.
One thing which I noticed on the System Status that the
Control Unit IP500 Current Firmware 5.0(15)
Mode: Professional Compact Card: Empty

Do you have any idea what could be the problem.

Thanks a lot.
 
Save the config ( Save As) and then reboot. Tried that?

Dulce et decorum pro Avaya mori
 
Hello holdmusic34,
Thanks for that, I'll try it... however is it normal for an IP500 to display [Compact Card: Empty] I want to make sure that when I reset the box it comes back normally.
 
Do you have a flash card in the IPO? If not, that's the appropriate message.

Kind regards

Gunnar
______________________________________
Mille viae ducunt homines per saecula Romam

2cnvimggcac8ua2fg.jpg
 
If you are running Professional then you won't have a compact card in an IP500V1
 
ok then i'll try saving the configuration and rebooting the box. thanks a million guys for the help
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top