IP412 to IP500 upgrade

[seadoo2000]

I have an IP412 unit currently running 5.x software. i'm going to ungrade to an IP500 7.x. My question would be can I reuse my V1 digital 30 modules on the IP500 7.x. I also have an analog (single line) module V1 and Trunk Module POT16.

Any ideas

Thanks

 

[AACon]

Yep, the external expansion modules will work fine.

-Austin
ACE: Implement IP Office
I show people how to use this stuff sometimes...

 

[Bas1234]

Don't forget the IP500 Upgrade Standard to Professional license.

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged (Avaya Search tool

http://tinyurl.com/bas1234

)
______________________________________

 

[hairlessupportmonkey]

> Don't forget the IP500 Upgrade Standard to Professional license.

Bas he is taking it to a 500 on rel 7

ACSS - SME
General Geek

 

[tlpeter]

And you do not need that on anymore when you are on 5.0 or higher.


BAZINGA!

I'm not insane, my mother had me tested!

 

[amriddle01]

No, but you need the "I'm not a muppet" licence for R8 which equates to the same thing

http://www.ipoffice.tel