IP350 / IPSO 3.6 and Web Visualisation Tool

[jemmahoff]

Hi All,

Would appreciate any help you could provide me with the following;

-1- We have a live checkpoint firewall1/vpn1 running on nokia ip330 with ipso 3.6 and checkpoint firewall1/vpn1 NG FP3. We intend on installing a second gateway at a remote site. The second device is a nokia ip350 with ipso 3.9. Checkpoint license for this covers the Firewall/VPN pro express NGX.

According to Nokia Website, the IP350 is not supported with ipso 3.6 and but is with ipso 3.5.1. We would like to retain the existing version of the ipso (3.9) but down grade the checkpoint package to NG FP3. I would like to read from anyone who is running the ip350 with ipso 3.9 and NG FP3 or know’s of any reservations with such a setup. Alternatively, I could downgrade the ipso image to 3.5.1 and install NG FP3?

-2- The cpdd2web.exe (or web visualisation tool) creates a 1.html file with headings but no data and generates the error message – “the procedure entry point_cp_get_cpdir could not be located in the dynamic link library OS.dll”.
I have installed the utility on 2 different windows pc’s (winxp sp2 and win2k sp4), both of which have access to the smartcentre server but the same error is repeated. The full syntax I am using to run the tool is “cpdb2html C:\Progra~1\CheckP~1\SMARTc~1\NGFP3~1\PROGRAM c:\cpinfo 192.168.5.200 adminname adminpassword”.

Where I’m I going wrong?


Thank you for your feedback.

Jemma
X

 

[jemmahoff]

Re point 2.

We used the wrong version web visualisation tool!

Tried using the ngx version against NG FP3 and then copied all *.dll's from the smartconsole install directory from my windows pc into c:\windows\system32. Output files are best viewed through Firefox browser.

Ta.