Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IP trunking between IP office and communication manager version 2.0 1

Status
Not open for further replies.

clared15

Technical User
Jul 16, 2007
2
GB
Hi please can anyone let mw know if they have IP offcie 406 and Communication manager s8710 version 2.0 linked via IP trunking and how this has worked for them? We are looking to connect a small branch office to our current system.
 
We have a customer who has a 406v2 trunked to a S8500 with CM 2.2. It has been rock-solid for a year and a half. But all they are using is 4 digit dial between locations. Each site has its own trunks and voice mail. No problems whatsoever.
 
As above our branch in London is linked fine with our Sister branches no issues at all.

ACA - IP Office Implement
ACA - IP Telephony
ACS - IP Office Implement (Aug 30th)
 
I have communication manager with 70 ip-office locations
no problems at all...

Also have an IPO with only Conference center connected to it.


Greets Peter
 
Can anyone post the directions on setting up IPO with CM using an IP trunk?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top