Ip trunk between Avaya and Cisco Denial Event

[granbb]

hi guys

Hi have a problem between Avaya Definity and Cisco Callmanager 5.1
Ip Trunk is in service and signaling in H.323
But when I dial from avaya sets to Cisco: i get an error tone and from Cisco sets to avaya sets: Call is OK

this is the list trace:
10:47:25 active station 7410 cid 0x1b
10:47:25 G711MU ssff ps:20 rn:2/2 192.168.1.247:2514 192.168.1.13:2212
10:47:25 xoip: faxT modemT tty:US 192.168.1.13:2212 uid:0xea
10:47:27 dial 11000 route:UDP|AAR
10:47:27 denial event 1751: No AAR/ARS route pat/pref D1=0xea D2=0x1c0019
10:47:27 dial 11000 route:UDP|AAR
10:47:27 route-pattern 32 preference 1 cid 0x1b
10:47:27 denial station 7410 cid 0x1b
10:47:28 idle station 7410 cid 0x1b

Can you HElp me please?

 

[Mitch672]

you are missing an "aar route", do a "list aar ana", you need to add a route, that uses the IP trunk group (or PRI if thats how you have it connected..)



Mitch

AVAYA Certified Expert

 

[4merAvaya]

Apparently 11000 is in your UDP table in the Definity. Within the UDP table you have to tell the switch where to route the call by using AAR or another steering routing. If you use AAR it points you to the AAR table where you tell the switch what Route Pattern to use. Within the Route Pattern you select the Trunk Group and do the digit manipulation.

Please post a copy of the UDP entry and the associated AAR and Route Pattern.

Kevin

 

[granbb]

Thanks for response

my problme has been resolved

in the table AAR the string contain a route-pattern that not there.
change route-pat in the AAR table and change in the Route -pattern table the pattern using turnk 32

this will fix everything

Thanks all