IP trunk and 4 digit dialing

[btrain8]

I have an s8700 (3.1) and a new standalone system (s8300 CM5) and we have an ip trunk built on both systems. What is happening is if the s8300 calls the main site you get name and number on the 8700 side but on the 8300 side you only see name.

if you call from the 8700 site to the 8300 site you see name and number on the 8300 site and you see name on the 8700 site but once the call is answered you see both name and number on the 8700 side.

This is running qsig between. no idea what to try to get this consistent. any ideas?

 

[FredLocks]

Do you have 'QSIG VALUE ADDED' switched on on your trunk groups?

If not, switch it on, try again and let me know.