Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IP TRUNK 3.0 HELP

Status
Not open for further replies.

nasa123

Technical User
Mar 5, 2009
30
NG
i have two opt11c that i need to newtwork using Ip trunk, i have two MC32 cards. I have read the NTP but a little confused about cabling the DCHIP card. Does this card physically connects to a PRI card using the DCHIP cable? Do i also need to do a normal Pri configuration? Let someone help me because it's my first ever IP config.

The two sites have just been upgraded to cs1000 5.5j on ssc


 
You will need a SDI/DCH card (NTAK02). You can use port 1 or 3 and ld 17 programe D-channel using CTYP=DCHI and USR=ISLD. Everything you can find them in Nortel book: IP Trunk Fundamentals.
 
1. MC32 cards don't use A DCHIP card. They are for ITG-P cards.
2. An SSC card running 5.5 only supports TDM.
3. IP Trunk 3.0 will not work on MC32 cards.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top