IP Sets

[Labash]

I have 4621SW IP sets that when plugged in boot to this:

DHCP: 21 seconds,22,23,etc.
VLAN ID-855

Is there a way to defualt these sets or boot interrupt so they can be used?
Thanks

 

[gblucas]

When the phone gets to the '* for program' prompt, press '*', then just hit '#' through the prompts until it gets to 'command', then press mute, 73738 (RESET) and then it should reboot and have all the settings reset...

gblucas

 

[Labash]

Thanks gb.
The set never shows a program prompt, it goes right to the DHCP/VLAN ID.

 

[LoopbackJack]

Unplug the phone, wait 10 seconds, plug it back into your POE. You have to be fast. * to program goes away quickly.

 

[vaoldschl]

Are you sure your VLAN is routing from the network segment? Could be the DHCP broadcast is picking up the VLAN ID (855) from option 176 but that VLAN might not be trunked to your registration point or the voice VLAN might not be configured on the switchport. Just a thought.