Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ip route command is not exchanged to other routers

Status
Not open for further replies.

Creater

Technical User
May 1, 2003
6
US
I have a lab att home that i have set up so that every comp can get out on to the net..

I have tre routers.
Intrnet <-> GatewayRouter <-> RouterA <-> RouterB

The way i have set it up is to use the ip route 0.0.0.0 0.0.0.0 213.100.88.1 on my gateway router but it will not exchange this info to the other routers.

If i insted activate dhcp en my internet port insted of static config, it will exchange &quot;Gateway of last resort is 213.100.88.1 to network 0.0.0.0&quot; to all the routers.

Is there a way to get my routers to exchage ínfo that i insert manualy on one of the router? As it does when the router gets info from dhcp isted?



 
Run a routing protocol such as RIP. Redistribute the static route into RIP.

andf1
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top