ip phones

[fjwhite]

I have a Definity with remote ip phones and they can call to the PBX and calls can be routed to them thru POTS lines but two ip stations can not call to each other

 

[Mitch672]

Check your IP Network Region form, make sure "hairpinning" is disabled, also in the IP-Codec set used for that region, make sure "Direct IP" is enabled on the top of page 2. You might also want to setup your IP-Network-Map to point to this IP-Network-Region form. In short, you need to check all of the IP parameters. Also, on the station forms, bottom of page 1 or 2, "direct-ip" should be a 'y', and "hairpinning" should be a "n"

mitch


AVAYA Certified Specialist