IP phones and group paging

[kbrocious]

I am using an IPO 406.V2 w/ 25 5610SW IP sets. I also have 2 Digital sets and a powered speaker.

The digital sets work fine, along w/ the speaker. However, the IP phone are garbled, jittery and some do not word at all.

I have found that this is not a bandwith issue w/ my curent network, nor am I having problems w/ phone calls. Also, pages are fine on all phone when a digital set is used to page from. Can anyone help me solve this problem.

 

[tlpeter]

turn AGC off in your 46xxsettings.txt file
maybe that works

 

[kbrocious]

I found the folder, but I can't find where to change that. Do I have to add new script, and if so, how?? Thx

 

[kbrocious]

I changed the settings right from the phone and still no luck. I'm guessing that AGC isn't whats wrong.

 

[auEric]

How many IP phones and what VCM? Does paging use a channel per phone?

 

[tlpeter]

that powered speaker is that near the ip phones ?
are thos ip phones next to each other
a ip phone on the speaker if very sensitive
try it with an ip phone seperate from the other phones (and powered speaker

 

[kbrocious]

The speaker isn't anywhere near the ip phones. Also, I'm having problems with the paging regardless of where they are positioned. Some are closer than others, but I am experiencing the same phenomenon on phones completely sectioned off from the others.
As far as the VCM's, does that really matter? I do, however, have 25 ip extensions and 4 VCM's. I only have 5 analog trunks feeding the unit.

 

[kbrocious]

And the survey says....Upgrade. I loaded 3.2.54 and all is good with the world.

 

[tlpeter]

good to hear