IP Phone Services / Application Server in Succession 3.0

[phonebits]

Hey everyone, lots of productive lab work has been done since I last poked in here for some help.
I seem to have come up against another brick wall. Can anyone tell me how applications (redial list, directory, call logs)
work with Succession 3.0? I can't find any reference to them in my Element Manager, and it's sort of annoying not
to have those features on the IP phones. Is it something that has to be separately installed on the Signaling Server?

Many Thanks,
Anthony

 

[KCFLHRC]

What kind of IP phones are they? Keep in mind 3.0 is not even supported any more and if you are using the newer 1100 series or 1200 series phones these features may not even be available.

 

[phonebits]

I've got an 1120e and 6 i2004s set up with this system. Pressing the directory key on both types of phone gives an error message "No Application Available". None of the menus on my signaling server or the install media mention an application server, and I can't find anything referencing it in Element Manager.

 

[BMiles2000]

Look up CLS CRPA, then read this FAQ...

http://www.tek-tips.com/faqs.cfm?fid=6236

Bryan J Miles
Implementation Engineer
Xeta Technologies Inc

 

[Firebird Scrambler]

Although you have Succession release 3, have you managed to update the IP firmware onto the Sig Server as your surrent one could be out of date?.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[phonebits]

By IP firmware do you mean the Unistim IP set firmware, or the IP line firmware on the signaling server itself? I've been reading on various forums about the limitations of Succession 3.0 and people have mentioned that 3.0 doesn't support the IP phone applications. Can I run a newer version of IP line with the same call server version?