ip phone programming

[letron]

HELLO,

I had a vendor in recently and noticed he had cahnged the TN on a 12002 set by pushing a sequence of keys, we are on a 1000E 4.5. any info would be great.

Thanks

 

[terrysdavid]

Are you sure he changed the TN from the IP phone?
He can reset the phone by pushing a sequence of keys!

 

[letron]

After reseting the phone can you then change the TN

 

[terrysdavid]

The only place I know to change the TN of a set is on the Call Server itself in ld 11.

 

[MagnaRGP]

The sequence of keys is:

mute, up, down, up, down, up, mute, 9, rls.

This resets the phone. Then wait for the tn prompt to display and then change the tn that you wish the phone to use.

That's it.

 

[bigindian65]

If you reset and log into the phone, you can also put in the tnb and IP.

Mato' Was'aka

 

[bzakk]

He just changed the tn that the phone is pointed at, he didn.t do any programming changes.

 

[gwebster]

The IP Phone can be changed locally to point to any configured node/TN. There are "installer" and "temporary installer" passwords which also come into play on whether or not this can be done.

 

[letron]

Thanks eveyone, I knew i wasn 't seeing things.