Mar 13, 2007 #1 Zwinter IS-IT--Management Mar 9, 2006 22 CA After the DST change all my IP 2002 sets are showing the wrong time (1 hour behind). All other sets M2616, IP2004, and IP2007 are fine.
After the DST change all my IP 2002 sets are showing the wrong time (1 hour behind). All other sets M2616, IP2004, and IP2007 are fine.
Mar 13, 2007 #2 bigindian65 Technical User Dec 27, 2006 4,597 US what's your option/system? Upvote 0 Downvote
Mar 13, 2007 Thread starter #3 Zwinter IS-IT--Management Mar 9, 2006 22 CA CS1000M 4.5 Upvote 0 Downvote
Mar 13, 2007 #4 Trevatwork IS-IT--Management Nov 30, 2006 309 have you tried re-setting the phones mute up down up down up mute 9 Release Phone will then reset. Trevor Upvote 0 Downvote
have you tried re-setting the phones mute up down up down up mute 9 Release Phone will then reset. Trevor
Mar 13, 2007 Thread starter #5 Zwinter IS-IT--Management Mar 9, 2006 22 CA I tried both ways of resetting the set with no luck. Upvote 0 Downvote
Mar 14, 2007 #6 marcuspb IS-IT--Management Jan 12, 2004 223 US I think there is an additional patch for this, our 2050's are acting up too Upvote 0 Downvote
Mar 14, 2007 Thread starter #7 Zwinter IS-IT--Management Mar 9, 2006 22 CA Does anyone know what the patch is? Upvote 0 Downvote
Mar 15, 2007 #8 Bandit454 Technical User Feb 1, 2006 26 US Ours is doing the same thing, anybody find out anything? Upvote 0 Downvote
Mar 16, 2007 #9 sporty2 Technical User Feb 16, 2006 159 US A quick fix is to change the system time by 1 min. and the I2002 will correct the time display. sporty2 Upvote 0 Downvote
A quick fix is to change the system time by 1 min. and the I2002 will correct the time display. sporty2
Mar 16, 2007 Thread starter #10 Zwinter IS-IT--Management Mar 9, 2006 22 CA Quick did not work. I am assuming you are talking about the PBX time. LD 2 stad 16 03 2007 11 18 04 Upvote 0 Downvote
Mar 16, 2007 Thread starter #11 Zwinter IS-IT--Management Mar 9, 2006 22 CA Typo sorry....quick fix did not work. Upvote 0 Downvote
Mar 21, 2007 Thread starter #12 Zwinter IS-IT--Management Mar 9, 2006 22 CA Anyone find out if this is a firmware upgrade or a PEP? Upvote 0 Downvote
Mar 21, 2007 #13 gwebster Vendor Jul 1, 2006 2,512 CA MPLR21738 on Sig Server & MPLR22123 for Call Server Upvote 0 Downvote