IP PHONE 1230 and BCM 400 Release 4.0 2

[ASB111]

Hi,

I know the IP PHONE SERIES 12X0 (1210, 1220 and 1230) are supported by :

•Communication Server 1000 (Release 5.5 and later)
•Communication Server 2000/2100 (CICM 10.1MR2 and later)
•Business Communications Manager 50 (Release 3.0 and later)
•Business Communications Manager 450 (Release 1.0 and later)
•Software Communication System (Release 3.0 and later)

But I eard the BCM 400 Release 4.0 with the late Patch (BCM.R400.SU.System.025-200912-1.0-1.0), the IP PHONE SERIES 12X0 should work.

I got all that in place and do not work.

Thank you for your help, Sam

 

[gwebster]

Nope. Not supported on BCM 200/400 with any patch.

 

[ASB111]

Thank you gwebster.

Sam

 

[foneman1]

I got this information from the read me file for Patch SU.25


Software Update BCM.R400.168-UTPS Description:
----------------------------------------------

- Issues found during Designer Testing of the Expansion Module for
IP Phone 1100 series Hardware.
Issues were found while testing with the Expansion Module for
IP Phone 1100 series hardware. There was a mismatch in the Expansion
Module for IP Phone 1100 series type. Also, issues with the misalignment
of the KEM labels are fixed.
Expansion Module for IP Phone 1100 series is now supported with BCM4.0
Q01578700-03

- Support for IP Phone 1110 Sets in BCM4.0
A new firmware file was added in the BCM4.0 build to support IP Phone 11 10.
Q01764255

- Inclusion of new firmware files for 1110, 1120e, 1140e, 2007,
2002 and 2004 Phase 2 IP sets.
Added the latest versions of firmware files for 1110 (0623C4D),
1120e(0624C3G), 1140e(0625C3G), 2007(0621C3N), 2002 and 2004
Phase 2 Sets (0604DAX). LLDP is supported on 0604DAX.
Q01779467

 

[ASB111]

Thanks foneman1,

I had a look to the read me file, and no where they mention something about the series 12X0.

You make me look it over again and I guest I will have to tell my customer to buy the right model of phones.

Thanks again, Sam