Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
IP Phone 115E. Headset Pin-outs
- Thread starter Alpina
- Start date
I am assuming you meant the 1150E IP phone 
I looked at my 1140 and the Model number is close enough anyway NTY S05. Anyway, why do you want a corded headset - just use Bluetooth unless you are putting out over 120 of them
I know for a fact they use the dark/smoke-end headset cords. The clear-end headset cords are for amplifiers. Usually you are safe enough just knowing that piece of info.
But the pin-out from the left with the key facing down is green-white-black-red as I am looking at a smoke-end cord. Good luck to you.
I looked at my 1140 and the Model number is close enough anyway NTY S05. Anyway, why do you want a corded headset - just use Bluetooth unless you are putting out over 120 of them I know for a fact they use the dark/smoke-end headset cords. The clear-end headset cords are for amplifiers. Usually you are safe enough just knowing that piece of info.
But the pin-out from the left with the key facing down is green-white-black-red as I am looking at a smoke-end cord. Good luck to you.
- Thread starter
- #3
Thanks Tman. Bluetooth is not an option. The headset connection on each phone will be connected to an audio combining unit to give single headset working from a radio system and the CS1000.
Question still stands, does anyone know the pin-outs for this 'phone please...
Question still stands, does anyone know the pin-outs for this 'phone please...
- Status
Similar threads
