Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IP Office with 9508 phones volume fades in and out

Status
Not open for further replies.
RocketJTech

RocketJTech

Technical User
Oct 17, 2011
213
US
I have a newly installed Avaya IP Office 500v2 with (6) 9508 phones and (1) Polycom conference phone running on 7.0(23).

The customer is complaining that, for the duration of virtually every call, the volume level fades in and out.
 
Sort by date Sort by votes
Probably a bug/hardware issue, you are not the only one.

Also mentioned in these other threads:

thread940-1651331
thread940-1671185
thread940-1664175

Untitled-1.png
 
Upvote 0 Downvote
Try turning AGC off on the 9508's.

Home-->Advanced Options-->Audio...

 
Upvote 0 Downvote
You should upgrade to 7.0.27 and than add the patch that just came out. it address issue with 9500 series phones and 1600 and 9600 series

 
Upvote 0 Downvote
I am experiencing the same issue, 7.0.27 with patch does not fix this issue, customer is still experiencing the issue after upgrade...

ACSS - (SME)
 
Upvote 0 Downvote
Just an update, it must be a hardware or firmware issue with the 9500 phones as I just replaced them with 5410's and the customer is no longer experiencing the problem, the 5410's work fine.

ACSS - (SME)
 
Upvote 0 Downvote
That is because it is a firmware issue.
When you replace them then the issue will go away because they use different firmware.


BAZINGA!

I'm not insane, my mother had me tested!

www.lantel.nl
logolantel.png
 
Upvote 0 Downvote
I have corrected the issue by upgrading to 7.0.27 (without the patch) then upgrading to 7.0.27 (with the patch)
 
Upvote 0 Downvote
Yes there is a patch 7.0.23. However, it sometimes causes a problem with toggling on the 9500s. I recommend upgrading to 7.0.27 WITHOUT the patch. Then upgrade again WITH the patch. the whole process takes about 2 hours. I have done it 3 times to 3 different systems and have been successful in all cases.
 
Upvote 0 Downvote
That is what i say :)

8.0.16 -> no patch
7.0.23 -> patch
7.0.27 -> patch



BAZINGA!

I'm not insane, my mother had me tested!

www.lantel.nl
logolantel.png
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

PhonesTech
  • Question
MS Teams with IP office - Multiple domain
Replies
1
Views
149
derfloh
derfloh
Dimorus
  • Locked
  • Question
ip office 406 and ip office 400 analog phones (downgrade)
Replies
4
Views
211
ipohead
ipohead
AvayaRed
IP Office KB Retirement 1
Replies
4
Views
459
Westi
Westi
TN94z
  • Locked
  • Question
IP Office 11.1.3.1 with IP Flex - Sending caller ID
Replies
7
Views
700
TN94z
TN94z
M
  • Locked
  • Question
can Cause Code = 16 in ip office
Replies
3
Views
292
IamaSherpa
IamaSherpa

Part and Inventory Search

Sponsor

Back
Top