IP Office V10.1 with 1120e / 1140e installation DHCP

[wooppee]

Hi,
I just don't remember how to point the IP 1120e / 1140e phone on the right vlan to get the DHCP from the IPO when booting on the data DHCP... I know it was something with option 272 and 176 but I don't remember how to set the string to point the IPO DHCP. I found a lot on procedures using a windows DHCP for both vlan but I need the DHCP to be the IPO for the voice vlan...
any one remember how to?

IP office, tu te fesses la tete sur les murs mais ca fonctionne!!!
ACSS SME
ACSS IPOCC
ACSS ASBCE

 

[janni78]

Seems odd but this is what Marketingtools says

DHCP Server Operation
Use DHCP for ease of installation and maintenance. Note however that for DHCP, only use of the IP Office system as the DHCP server is supported for installation of 1100/1200 phones.

"Trying is the first step to failure..." - Homer

 

[Nortel4Ever]

I have installed Nortel IP phones on an IPO and DHCP is not supported, you need to statically assign an address to each Nortel IP phone.