IP Office Using CallPilot via PRI to CS1000

[drburt]

I see it documented that IP Office can use CallPilot via SIP.
I figured I could get IPO integated with CallPilot via QSIG.
I see where integration is documented for Cisco, so I figured why not.
Does anyone have this working?
IPO 9.0.300.941, CS1000 7.5, CallPilot 5.1

CallPilot recognizes my IPO user as a CP user when I call the CDN for CallPilot.
MWI turns on and off on the IPO phone.
When my IPO phone is forwarded to the CP CDN, and I call that phone from an internal or external number, CP doesn't integrate and answers with "CallPilot-Mailbox".
It looks as if the calling number of my cell is being sent over the DCH instead of the called number.

Been searching everywhere for an answer.
Thanks in advance.

 

[KCFLHRC]

Turn on D-channel messaging in the CS1k and see what it's receiving on the forwarded call.

 

[KCFLHRC]

It also looks like there is a QSIG A or B in the IPO, not sure what the difference is.

 

[drburt]

Thanks KCFLHRC. I had been looking at the MSGI and that's where it showed my calling number as my cell and the called as the CP CDN.

DCH 3 UIPE_IMSG CC_SETUP_IND REF 00001F80 CH 67 1 TOD 14:55:04 CK 6E3A06B2
CALLED #:3800 NUM PLAN: UNKNOWN TON: UNKNOWN
CALLING #:1806XXXXXXX NUM PLAN: E164 TON: NATL

3800=CP CDN
1806XXXXXXX=my cell.

>>>>>>>>>>>>>>>>>A Call Trace shows - <<<<<<<<<<<<<<<<<<

.15:20:30 02/12/2014
ACTIVE TN 067 23

ORIG TN 066 10 DID RMBR 0 10 INCOMING TRUNK CALL
TERM TN 067 23 TIE RMBR 45 23 OUTGOING TRUNK CALL
DIAL DN 3342
MAIN_PM ESTD
TALKSLOT ORIG 22 TERM 31
EES_DATA:
NONE
QUEU NONE
CALL ID 0 17734


---- ISDN PRA CALL (ORIG) ----
CALL REF # = 363
BEARER CAP = VOICE
HLC =
CALL STATE = 8 CONN REQ
CALLING NO = 806XXXXXXX NUM_PLAN:E164 TON:NATIONAL ESN:NPA
CALLED NO = 3342 NUM_PLAN:UNKNOWN TON:UNKNOWN ESN:UNKNOWN
---- ISDN PRA CALL (TERM) ----
CALL REF # = 62
BEARER CAP = VOICE
HLC =
CALL STATE = 10 ACTIVE
CALLING NO = 806XXXXXXX NUM_PLAN:E164 TON:NATIONAL ESN:NPA
CALLED NO = 3342 NUM_PLANRIVATE TON:ABBREVIATED ESN:CDP
PDCA 1 PAD 0 0 PCML MU MU
PDCA 1 PAD 0 0 PCML MU MU

3342=the IP Office phone I'm calling that forwards to CP.

 

[drburt]

QSIG A and B seem to be like DCH Side=NET or USER.
I've tried both

 

[KCFLHRC]

Have you taken a look at this thread?

http://www.tek-tips.com/viewthread.cfm?qid=1032204

 

[drburt]

Thanks KCFLHRC. I had already looked at that thread. I appreciate your help