IP office to CM with Modular Messaging Qsig Divert issues

[cnesstech]

In the trace below, a call is shown covering to MM through a CM via QSIG. In the "DivertingLegInformation2" qsig message, the IP Office is sending a divert reason as 0 instead of a valid reason code. CM doesn't recognize the reason and sends all covered calls to the login prompt of MM. Does anyone know of a way to get IP Office to send a valid divert reason code?

864165mS PRN: Monitor Status IP 406 DS 4.0(14)
864166mS PRN: LAW=U PRI=1, BRI=0, ALOG=4, ADSL=0 VCOMP=4, MDM=0, WAN=0, MODU=1 LANM=0 CkSRC=5 VMAIL=1(VER=0 TYP=5) CALLS=1(TOT=26)
869254mS CMTARGET: 5.2.1 26 Q931 Trunk:5 CHAN=1: TimerExpired cause=CMTCCoverageTimeout
869254mS CMTARGET: 5.2.1 26 Q931 Trunk:5 CHAN=1: GetNoAnswerTimer:15
874254mS CMTARGET: 5.2.1 26 Q931 Trunk:5 CHAN=1: TimerExpired cause=CMTCNoAnswerTimeout
874254mS CMTARGET: 5.2.1 26 Q931 Trunk:5 CHAN=1: ActionNoAnswerTimeout()
874255mS CMTARGET: 5.2.1 26 Q931 Trunk:5 CHAN=1: Retarget NOANSWER EXCEPTED=00000001 INCLUDED=00000001 valid=0
874255mS CMTARGET: 5.2.1 26 Q931 Trunk:5 CHAN=1: Retarget on target_cfg_user=John Lorenz
874255mS CMTARGET: 5.2.1 26 Q931 Trunk:5 CHAN=1: ADD USER: John Lorenz depth=1 disallow_cw=0 dnd=0 real_call=1 type(CMNTypeUnknown) incl(0x1) excpt(0x1), allow_redir(1) remote=00000000
874256mS CMTARGET: 5.2.1 26 Q931 Trunk:5 CHAN=1: SELECT: TRY VOICEMAIL orig_hg() orig_user(8313)
874256mS CMTARGET: 5.2.1 26 Q931 Trunk:5 CHAN=1: ADD VOICEMAIL TARGET
874256mS CMTARGET: Group Id: 10 has NOT been found in Line: 5
874257mS CMMap: a=3.3 b=0.0 Mapper::AllocateCodec allocated CMRTVocoder resource busy 1, total 4
874263mS CMTARGET: 5.2.1 26 Q931 Trunk:5 CHAN=1: ADD VOICEMAIL TARGET: SUCCEEDED
874263mS CMTARGET: 5.2.1 26 Q931 Trunk:5 CHAN=1: GetNoAnswerTimer:15
874267mS CMLineTx: v=10
CMSetup
Line: type=IPLine 10 Call: lid=0 id=1081 in=0
Called[2899] Type=SubscriberNumber (4) Reason=CMDRX_MailboxAccess SndComp Calling[9162610288] Type=Unknown Plan=ISDN Pres=Allowed (0)
BC: CMTC=Speech CMTM=Circuit CMTR=64 CMST=Default CMU1=ULaw
IE CMIESupplementaryService (3)
Network Facility Extension
sourceEntity: 0
destinationEntity: 0
Interpretation APDU
rejectAnyUnrecognisedInvokePdu
divertingLegInformation2.Invoke.CodePageISO8859-1
invokeId 14627
counter 1 reason 0 original reason 0 diverting number <8313> original called number <8313>
Display [9162610288>John Lorenz]
Timed: 20/06/11 05:46

 

[amriddle01]

I am fairly certain such things are not configurable, unless there are some No User source numbers I don't know of