IP Office to Allworx

[skurtz11]

I work for a company that wants to connect their phone system together.
The other company is already on Allworx and using SIP trunks. Rather than move everyone over to the Avaya (cost$$$), we would like to trunk the two systems together. I have connected IP Office to other systems like Asterisk in the past, but cannot seem to find anyone that has done it with an Allworx. Anybody run in to this before?

 

[atcom]

I would suspect the process would be nearly identical to networking with FreePBX. Is there a particular step that's hanging you up?

-----------------------------------

Calgary Telephone Systems, Avaya LG Asterisk (FreePBX) VOIP & TDM

 

[skurtz11]

Nope! Haven't started yet, was planning my procedure more than anything. Any particular FreePBX guides that anyone would recommend?

 

[janni78]

It's a SIP trunk not a space rocket, connect it to the Allworx as you would with anything else and take it from there.
From the IPO side it should take many minutes to configure it.
Monitor traces will tell you if and why something isn't working.


"Trying is the first step to failure..." - Homer