Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IP Office Softphone Answer/End

Status
Not open for further replies.

cdavis18

Vendor
Feb 19, 2013
23
US
Anyone know how to get the auto answer to work? Also can't get the HID Device setup to work so I can configure an answer/end button. Seems these options are both broken.
 
THE MANUAL said:
2.8 Auto Answer
Auto answer is initially configured to auto-answer after one ring, and to send only your audio when the call is established.
To change this configuration choose
Softphone > Preferences >
Call Automation
.
1.
In the call panel click
and select
Auto Answer
.
Note:
Auto answer is automatically turned off when you shut down.

Auto Answer Calls
Use the settings in the
Auto Answer Calls
area when you have selected auto answer in the Softphone call panel. You can select the time required before an auto answer occurs, as
well as you can select whether to use audio or video by default when answering a call

Third-party Call
Automation
The Third-party Call Automation feature controls how the softphone handles external auto-answer requests. Ensure that this option is set to
Auto-answer with audio-only

ACSS - SME
General Geek



1832163.png
 
That would be great, if it worked. The problem is it doesn't auto answer, ever.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top