Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IP Office Remote access via dial up throught ISDN LIne

Status
Not open for further replies.

Allenmendoza

Vendor
Jul 11, 2014
39
SG
Hi All,

is there anybody that experienced of not unable to connect in IPO ver 10 via dial up using the ISDN line. Our experienced is once the authentication is completed, an error will appear saying "Remote Site is not responding".

thank you.

 
I remember seeing mentions of this when R10 was first released. If you search the forums I am sure you can find other posts about this issue. That being said you might want to try either 10.0.4 or 10.1 and see if it resolves the issue.

The truth is just an excuse for lack of imagination.
 
I can confirms Critchey's recollection
ISDN dialup was broken prior to V10.0.3

I can also confirm that it works without a problem on 10.0.3, 10.0.4 & 10.1


Do things on the cheap & it will cost you dear
 
@ Crithey and IPGURU - thankyou so much for the replies. we will try to upgrade the customer system
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top