Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IP Office release 8.1.79 power outage issue

Status
Not open for further replies.

IPOguy

Vendor
Oct 18, 2007
69
US
Has anyone run into an issue with 8.1.79 when the power goes out for more than an hour that the system will not power back on correctly and all the light stay solid red? I have had 2 within a week do the same thing, I did find a solution, had to remove the SD with 8.1.79 insert SD card with 7.0.36, upgrade via the SD then power back down and re-insert the 8.1.79 SD card, and wa la it works, trying to figure out how to fix future issues
 
The fix would be a UPS, leaving a system dark for an hour is not acceptable.

Second, there's been four updates since R8.1.79, why don't you try one of them.
Recreate the SD while you're at it.

Kind regards

Gunnar
______________________________________
Mille viae ducunt homines per saecula Romam

2cnvimggcac8ua2fg.jpg
 
I agree with Gunnar, upgrade it and try again.
But a nice UPS for the IPO should fix your problems.

BAZINGA!

I'm not insane, my mother had me tested!

 
thanks for the info guys, I will do the upgrade and see what happens, there was a UPS on the unit, but of course the power outage was for quite some time and it ran out, just surprising that it happened the way it did, the old days of partner acs never had these issues, lol
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top