IP Office Ports (more detail) 1

[r6wraith600]

I am wondering if anyone has information about the ports that the IPO uses in more detail other then the simply what the help file has.

I need to know specifically what uses TCP and UDP or both. For example I have found one port lists only TCP however when we logged it it was requesting both TCP and UDP.

So I ask if anyone has documents or more information about the port usage in greater detail I would appreciate it.

 

[Baumann1]

I have this, but its from a while back. I think its all still relevant though



Port Number Description
1 TCP Port Service Multiplexer (TCPMUX)

5 Remote Job Entry (RJE)
7 ECHO
18 Message Send Protocol (MSP)
20 FTP -- Data

21 FTP -- Control
22 SSH Remote Login Protocol

23 Telnet

25 Simple Mail Transfer Protocol (SMTP)

29 MSG ICP
37 Time
42 Host Name Server (Nameserv)
43 WhoIs
49 Login Host Protocol (Login)
53 Domain Name System (DNS)

69 Trivial File Transfer Protocol (TFTP)

70 Gopher Services

79 Finger

80 HTTP

103 X.400 Standard

108 SNA Gateway Access Server
109 POP2
110 POP3

115 Simple File Transfer Protocol (SFTP)
118 SQL Services
119 Newsgroup (NNTP)

137 NetBIOS Name Service

139 NetBIOS Datagram Service
143 Interim Mail Access Protocol (IMAP)
150 NetBIOS Session Service
156 SQL Server

161 SNMP

179 Border Gateway Protocol (BGP)

190 Gateway Access Control Protocol (GACP)
194 Internet Relay Chat (IRC)

197 Directory Location Service (DLS)
389 Lightweight Directory Access Protocol (LDAP)

396 Novell Netware over IP
443 HTTPS

444 Simple Network Paging Protocol (SNPP)
445 Microsoft-DS
458 Apple QuickTime

546 DHCP Client

547 DHCP Server
563 SNEWS
569 MSN
1080 Socks


SysMon - 50794
AVRips - 50795
PCPartners - 50796
Manager - Standard TFTP - 69
TAPI - 50797
Phone Manager voip - 1719 send 1720 receive
ip audio ports, 49152 - 53247 (anything in this range will set up the voice path)
Phone Manager Ports and Firewalls
Phone Manager uses the following IP ports for communication with the IP Office. Therefore if a firewall is placed between the user PC and the IP Office, traffic on these ports should be allowed.
• Port 69 on the IP Office and the Phone Manager PC- TFTP
This is used by the Phone Manager to obtain data from the IP Office such as user name lists and the switch directory. TFTP is also used during the application log on.
• Port 50796 on the IP Office - IPO PC Partner
This port is used by Phone Manager and Soft Console applications to establish communication with the IP Office for call signalling, configuration changes, etc.
• Port 50799 on the Phone Manager PC - IPO BLF Updates
Used by Phone Manager to receive status updates for internal speed dial icons. These are sent from the IP Office using the 255.255.255.255 broadcast address.
• VoIP
iPhone Manager Pro uses ports 1719 and 1720 for H323 Gatekeeper discover and then a range of ports for VoIP. Therefore we can only recommend iPhone Manager Pro operation across a firewall when using VPN to tunnel the connection.

Known Used Ports
50791 - UDP VoiceMail
50794 - UDP SysMonitor
50792 - UDP Network DTE
50795 - UDP Voice networking
50796 - UDP PCPartner - PhoneManager/eConsole
50799 - UDP BLF
50800 - UDP Licence Dongle server
50797 - TCP TAPI
50794 - TCP SysMonitor
50801 - TCP Enhanced conferencing
50798 - UDP Assign Protocol - special broadcast IP address setting protocol
50793 - UDP 3rd party TAPI voicemail interface

IETF standard ports for:
TFTP = 69
BOOTP Client = 67
BOOTP server = 68
DNS = 43
NTP = 123
H323 = 1719, 1720
SNMP = 161

 

[jamie77]

25* SMTP (TCP) Email system alarms from the IP Office to SMTP server.
67 BOOTP/DHCP
68 BOOTP/DHCP
69 TFTP (UDP) File requests to the IP Office.
69 TFTP (UDP) File requests by the IP Office.
161* SNMP (UDP) From SNMP applications.
162* SNMP Trap (UDP) To addresses set in the IP Office configuration.
389* LDAP (TCP)
520 RIP (UDP) To and from the IP Office to other RIP devices. For RIP1 and RIP2 (RIP1 compatible) the destination address is a subnet
broadcast, eg. 192.168.42.255. For RIP2 Multicast the destination address is 224.0.0.9."
520 RIP (UDP)
1719 H.323 RAS (UDP) H.323 VoIP device registering with the IP Office.
1720 H.323/H.245 (UDP) Data to a registered VoIP device.
2127 (UDP) PC Wallboard to CCC Wallboard Server.
5060 SIP (UDP/TCP) SIP Line Signalling
8080 HTTP (TCP) Browser access to the Delta Server application.
8089 Enconf (UDP) From the IP Office to the Conferencing Center Server Service. User access to the conference center is direct via HTTP
sessions."
8888 HTTP (TCP) Browser access to the IP Office ContactStore (VRL) application.
49152-53247* RTP/RTCP (UDP) Dynamically allocated ports used during VoIP calls for RTP and RTCP traffic. The port range can be adjusted through the System | Gatekeeper tab.
50791 IPO Voicemail (UDP) To voicemail server address.
50793 IPO Solo Voicemail (UDP) From IP Office TAPI PC with Wave drive user support.
50794 IPO Monitor (UDP) From the IP Office Monitor application.
50795 IPO Voice Networking (UDP) Small Community Network signalling (AVRIP) and BLF updates. Each system does a broadcast every 30 seconds. BLF updates are sent required up a maximum of every 5 seconds.
50796 IPO PCPartner (UDP) From an IP Office application (for example Phone Manager or SoftConsole). Used to initiate a session between the IP Office and the application.
50797 IPO TAPI (UDP) From an IP Office TAPI user PC.
50799 IPO BLF (UDP) Broadcast to the IP Office LAN and the first 10 IP addresses registered from other subnets.
50800 IPO License Dongle (UDP) To the License Server IP Address set in the IP Office config.
50801 EConf (UDP) Conference Center Service to IP Office.
50804* HTTP (TCP) IP Office configuration settings access.
50808* HTTP (TCP) IP Office system status access.
50812* HTTP (TCP) IP Office security settings access.


Jamie Green

ACA:Implement - IP Office
ACS:Implement - IP Office

http://www.alliedcom.co.uk

Football is not a matter of life and death-It is far more important!!!!

 

[r6wraith600]

Jamie77 Thanks that is the best bit of information that I have gotten. I find it hilarious and frustrating at the same time that the help file and documentation lists 1719 and 1720 as TCP yet you need UDP as I clearly saw.

You get a star!

 

[r6wraith600]

I had the pleasure of speaking to a few Avaya "Management" staff from support the other day. I brought up the issue of inaccurate and poor documentation on this particular subject so let's hope when I send off the email information they requested that we see something in the future.

They are in the process of adding piles of tech support pdf's and articles and this is one topic I know they are going to address. Just wanted to throw that out there for all of you that have had the same frustrating experience with finding out the proper port detailed information for this platform.