Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IP Office Paging to Bogen ZPM-3

Status
Not open for further replies.

JoeBuck

IS-IT--Management
Feb 25, 2010
40
US
We are setting up an IP Office system to page to a Bogen Zone paging Module. We setup an analog extension and a paging user with the DialPage shortcode of *5. The problem is that the shortcode gets to the Bogen and we can page but it goes out to all speakers. How do we set this up so that we access the talk line in the Bogen and then define the paging zone we want it to go out on? We have 3 zones - 0, 1, & 2.

I tried to use the paging shortcode and then press 0,1, or 2 right away but it still does an all page?

Thanks!
 
I read through the other post but it doesnt go into detail on the shortcodes. I am still unclear as to where to define the zone in the shortcode setup.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top