phonedude17
Technical User
Does "twinning" on the IP Office require a special circuit (T1) or will the feature work with analog co ports?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
IP Office Mobile Worker 1
- Thread starter phonedude17
- Start date
- Status
intrigrant
Systems Engineer
You need IPO 500 BRI PRI or SIP
-
1
- #3
It will work with analog trunks but you will not get simultanious ringing. So when the twinned phone starts to ring the desk phone will stop. You can still pull the call back to the desk phone using the Twinning button.
Kyle Holladay
ACA-I, ACA Call Center, ACS-I, ACS-M,
ACE Implement: IP Office
TIA-CTP, MCP/MCTS Exchange 2007
Adtran ATSA, Aruba ACMA
"Thinking is the hardest work there is, which is the probable reason why so few engage in it." - Henry Ford
Kyle Holladay
ACA-I, ACA Call Center, ACS-I, ACS-M,
ACE Implement: IP Office
TIA-CTP, MCP/MCTS Exchange 2007
Adtran ATSA, Aruba ACMA
"Thinking is the hardest work there is, which is the probable reason why so few engage in it." - Henry Ford
- Status
