Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IP Office interface to a Rauland Telecenter 6000

Status
Not open for further replies.

racom

Vendor
Mar 9, 2005
94
US
thread940-1786719

I have an IP Office currently interfaced via a trunk port on our system to the Rauland station port. It works well, however, I want to make an emergency page interface. I am having no luck. There is no documentation available on the Rauland system, and the dealer that installed it is MIA when it comes to "small" requests. I am looking for a MIC input, music input, or line level input that I can connect an IP paging interface to. Found an older thread that is basically the same thing as what I need, but this is a Rauland. Anyone??
 
Rauland has their products pretty well locked down - can't find schematics or manuals anywhere.
However, it is going to have a microphone input, with a push to talk switch. Use a single line station port, program it as a paging port. Next you need a matching transformer, and a VOX activated relay. For off the shelf parts, use a Viking AIB-1 Audio Isolation Board and FXI-1A paging interface.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top