IP Office and Microsoft Lync

[Darby123]

Hi Everyone

I have a requerst of integrating a IP Office and Microsoft Lync. I believe that this can be done using SIP trunks etc.

Has anyone done this before? If so can you let me know on some pointers or additional hardware which would be needed.

Thanks in advanced

 

[Darby123]

test

APSS
PASMI

 

[hairlessupportmonkey]

http://www.tek-tips.com/viewthread.cfm?qid=1642609&page=5

http://www.tek-tips.com/viewthread.cfm?qid=1634796&page=1

ACSS - SME

 

[Darby123]

Thanks you for your response.

As not doing this before and not really looked at the Microsoft Lync. To my understanding there needs to be some middleware between the IP Office and the Lync server. I'm thinking of installing a Dialogic DMG400 series to be the middleware. As I think this has to do the UDP to TCP SIP transfer.

Do you know what limitiaions there would be in using SIP between?

Thanks

APSS
PASMI

Aastra Accredited Expert

 

[hairlessupportmonkey]

ideally there is no presence available between the ipo and lync using just sip trunks

ACSS - SME