Heard some rumors that the IP office R5 allows for consoles to fail over to one another, yet I cannot find any references in the documentation. Can someone please confirm or deny this feature?
You can setup a resilient ipo by SCN
Then IP phones will register to the other ipo when they can not do that on there home ipo.
ACSS - SME (IP Office)
ACA - Implement IP Telephony -- ACA - Design IP Telephony
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!
Tested and approved, if you have 2 IPO (or more) in a SCN network, IP Endpoints will connect the 2nd one if the main comes to fail (in about 3 minutes).
That works, i have tested it
Tried it with a 3720 and 3725 too with a second ipo programmed in the master RBS but that did not work very well.
You then need to try to get dialtone which you do not get, hang up and try again.
Mostly you get a dialtone then.
ACSS - SME (IP Office)
ACA - Implement IP Telephony -- ACA - Design IP Telephony
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!
Thanks for all the responses. We are looking to design a topology based this feature but it appears that external voice gateways are in order (4 PRI circuits, two in each cabinet, will be prohibitively expensive). We have existing Cisco VG200 gateways that would be perfect if they will play nice with Avaya. Anybody worked with this configuration?? I have posted this question in another thread as well. Thanks for all of your input.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.