Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations dencom on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IP OFFICE 401 UPGRADE FROM 3.2 TO 4.2

Status
Not open for further replies.

CMtech38

Programmer
Jan 27, 2008
59
JM
Hi, Can anyone tell me the procedure in upgrading a IP office 401 memory to accept the 4.2 bin...
 
I assume you mean 401 SOE (ip401ng).

Load 3.2(999) then 4.2. It's in the tech bulletin.

Jamie Green

ACA:Implement - IP Office
ACS:Implement - IP Office

Football is not a matter of life and death-It is far more important!!!!
 
If you go to 4.2 then it will ask to do an Offline upgrade, select offline and wait....it will start to upgrade after a while.
Probably because of memory restriction.
But like jamie said upgrade first to 3.2.999 it's also in the 4.2.4 Admin software.

Greetzzz..Bas

y1pzZTEUdok1vrI5cLb3FdPX4PgTPlSONkb5WPjz0x50etSujaMSmhdRCbOx9vASnrRNzzXv0IxNQA

___________________________________________
It works! Now if only I could remember what I did...
___________________________________________
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top