IP networking between two 3300 ICP v8 out of service

[ve2abo]

Hi !

I'm trying to set up ip networking between two 3300 ICP v8.
Let call them pbx A and B.

Pbx A is clustered (with OPS) with 13 other 3300 (all version 8)
Pbx B is not-clustered but have an ip trunk with 1 other 3300 (none from the above cluster)

I've followed Mitel embedded help to the letter, but when i try it, the system raise an "ICP COMM card" alarms.

When doing a "stat xnet all" i can see that the new trunk is out of service. But no clue as to why.

When doing a "rmess verify pbx [A or B] lan", i get a verification succesfull.

I'm pretty much out of idea as to what to test next.

Any idea ?

 

[Supernova99]

Make sure you have completed all the forms correctly
especially the IP/XNET trunk profile form
Make sure that the Trunk service is correct with at very least an absorb 0 in the digits to absorb

This need to be checked on both ends

I have also noticed that sometimes when adding a new IP/XNET network one or both systems requires a reboot to get it working

Share what you know - Learn what you don't

 

[LoopyLou]

You can always compare the forms to the ones in place on the clustered system. Follow SuperNova99's advice.

The single biggest problem with communications is the illusion that it has taken place.