I'm having a problem networking 2 systems. I have IP networking licensed, created routes, ICP/PBX, XNET ICP/PBX,trunk service and trunk group assignments. I added numbers in ARS to allow dialing...but when I dial the 4 digit extension at remote ICP, I get a fast busy after completing the dialing. Help!...What am I missing?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
IP Networking between 2 3300 ICP's
- Thread starter telco101
- Start date
Could be any one of a dozen things unfortunately.
you need to tell us more detail of how you set it up.
ARS Digits
Ars Routes
Associated Cor Groups
Associated Mod Digit Strings
Xnet Trunk Groups
Xnet Trunk Profiles
Trunk Service assignment (absorb digits esp)
Xnet ICP/PBX assignment
ICP/PBX assignment
Network Assignment
The more detail the better
*******************************************************
Hard work often pays off after time, but laziness always pays off now.
you need to tell us more detail of how you set it up.
ARS Digits
Ars Routes
Associated Cor Groups
Associated Mod Digit Strings
Xnet Trunk Groups
Xnet Trunk Profiles
Trunk Service assignment (absorb digits esp)
Xnet ICP/PBX assignment
ICP/PBX assignment
Network Assignment
The more detail the better
*******************************************************
Hard work often pays off after time, but laziness always pays off now.
- Thread starter
- #3
I did get it working...finally!...but i do appreciate your reply..I've just recently began working on Mitel systems, so I'm in a learning mode..i will provide more details next time when i'm in need of 3300ICP expertise......Have a great weekend!!
- Status
Similar threads
- Locked
- Question