Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IP-NETWORK-MAP and Network Regions

Status
Not open for further replies.
Nov 27, 2012
167
US
Question... Are IP phones the only devices who's network region assignment are set in the ip-network-map table, or does this also apply to media gateways, MedPros, CLANs, and other addressable devices?


===
Chuck Chamblee
ACSS (CM) | CTP | A+
 
Media gateways and cabinets network region settings are programmed when you add the cabinet/media gateway. IP circuit packs also get their network region settings from the IP-Interfaces settings. Phones/IP endpoints are the only devices that I know of that use the IP Network Map settings.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top