ip LDK 100 flexible button codes

[Mallers1983]

Hi All,

I have just inherited a customer who has an LG Nortel ipldk100 and was just looking for some help with programming the flexible keys on the phone. Some of the phones have lines assigned to the buttons and my customer would like this to be available on other extensions. Also some of the keys on handsets do not correspond (check in, check out, set alarm, cancel alarm, delete buffer) and I cannot find the codes anywhere

Please help!!!!!!!

 

[jmcevoy]

Hi Mallers Do you have a copy of LDK PC Admin software ? if so it is easier to change the programming on Flex keys with this software as codes are hidden behind the interface , You can also find the codes in the manual how ever one of the other chaps on the forum may be able to provide a link to this . Flex button assignment can be done from the attendant station on pgm 115

PGM FLEX ITEM RANGE DEFAULT REMARK
Flex. Buttons Assignment FLEX 01-44 Each Flexible Button in a station can
be assigned as desired
1: User Key
-
User can program by button
programming procedure. (empty)
2: {CO} Button 001-400 (IP LDK-300E)
001 200 (LDK 300)
CO Line
3: {CO Line Group} Button 01-72 (IP LDK-300/300E)
01-24 (IP LDK-100)
CO Line Group
4: {LOOP} Button -
5: {STA xxx} Button STA No. Station No.
6: STA PGM Button 11 – 99 Station Programming Code
7: {STA SPD xxx} Button STA SPD Bin No. Speed Bin
8: {SYS SPD xxxx} Button SYS SPD Bin No. System Speed Bin
9: FLEX NUMBER Number Plan Code Number Plan Code
10: Networking DSS Button Networking No. Networking DSS Number
115 01-24
11: MSN Button MSN No. MSN No.

the above was copied from manual .

hope this helps

 

[randall1uk]

Check in is Trans #11
Check out is Trans #12
Wake up set is Tans 042
Wake up cancel is Trans 043
delete smdr will not be used any more if you are in the uk